Simple, reliable, affordable
CO2 LASER POWER METER
- suitable for 0-200w CO2 lasers
- 3 test modes 15,30,60 sec exposure
- Micro usb charging
- 380mAh battery, 30+ hours run time
- Records last test result
- High visibility & contrast Oled display
- 1% +/-1 accuracy
Featuring a single button and automatic power down function to power up the meter simply press the button once.
After a brief moment the power meter will enter the calibration process, this must be carried out each time the unit is power cycled. This calibration cycle allows the high accuracy 12 bit analog to digital converters to stabilise before applying our error reduction algorithm. On average this process takes around 5 seconds to complete.
Once calibration is complete the home page splash screen will be displayed. To the top right of the screen is a battery gauge, when this gauge becomes depleted the unit can be recharged using a standard 5v usb charger and micro usb cable. The circuitry has been designed with efficiency in mind. Boasting a 30 + Year standby battery life, and 30 hours continuous operation life time before charging is required. On average it takes around 1 minutes from power up to obtain a measurement, based on this you should expect upwards of 900 measurements before a charge is required. Usb recharging takes around 15-30 minutes to complete.