The ZYE laser power supply boasts the highest efficiency and fastest response when compared to other laser power supplies. A fast response time ensures superior engraving quality and faster tube strike times.
Due to the zero current half-bridge soft switch circuit technology this power supply boasts a longer working lifetime and greater efficiency?s than other power supplies
Both TTL High & Low can be used to control the power supply, this ensures greater compatibility across all brands of laser.
Open circuit protection, laser tube failure is a dangerous scenario. When a laser tube fails due to the nature of the high voltages involved the voltage will jump from the positive end of the laser tube to the machine body. This is known as the lighting strike, it can and will damage sensitive and expensive components such as the laser controller and power supplies, worst case it can cause serious harm to the machine operator. In the event of a tube failure this power supply will detect the scenario in a very short time and cease to fire the laser.
Quality assurance, ZYE brand have a focus on quality and repeatability. Each power supply is subjected to ageing and high temperate tests. Each power supply is tested for 12 hours at high temperature of 60ºC on full load, and 500 x full power on and off tests.
Input Voltage – 220v 47-470Hz
Output – 50KV 38mA
Size L X W X H (mm) – 197 X 161 X 91
Weight (kg) – 2.1
Efficiency – 91%
Response Speed – < 1ms
Environment – -30ºC – + 65ºC
Insulation resistance – ?50M?(DC500V)
Earth leakage current – ?1mA(AC220V)?0.5 mA(AC110V)
Vibration resistance – Amplitude 0.5mm frequency 10~55Hz three-dimensional direction 2h
Comes with spare high voltage connector and cable.